BuildingProtector [Unmaintained]

But if it's not enabled on Tues/Fri/Sun buildings are vulnerable during those periods, which defeats the purpose of setting raid times; see?

 

Aw that's what you meant ! Yes i thought you wanted the plugin to be disabled on week ends for exemple because people are not working so raids could be enabled all the W-E ... I understand what you mean and i think i'll work on a "rework" of the plugin so you can chosse the hours of raiding PER DAY. But it will be a bit more complicated so may take some time too ...
You can still change the config whenever you want and type oxide.reload BuildingProtector in your console to update it.

Sorry for the misunderstanding ... My english is not very good so it doesn't help that much to understand you x)

 

Okay no problem, in the meantime I'll just have to swap it manually. Thanks for all your help Onyx, and you have no need to apologize; your english is excellent, and if anything the misunderstanding is my failure to articulate my needs.

My goal is to have raid windows four nights a week with the war dec system we talked about before. This way casuals can compete with more hardcore players, but not avoid fights by not logging in. Thanks again Onyx i'll be in touch, the server is almost up and i'll be shooting the IP your way soon, still tweaking some other mods. Been working all morning though, about to take a break. Need to shoot some stuff

 

Haha good luck. I'll go to bed !

 

Is it possible to set it up, so you can't raid at all??

 

Yes, just have all days listed and set all time slots to O, should do it.

I think you might prefer an alternative mod if you simply want to turn off raiding though; this one advertises what you're looking for, i havn't used it personally though: http://oxidemod.org/plugins/damage-mod-buildings.1239/

I believe theres other options as well.

Below should do what you're looking for (i think!).

Code:

{
  "End of raids": {
    "Hours": 0,
    "Minutes": 0,
    "Seconds": 0
  },
  "Messages": {
    "InformMessage": "Hands off mah buildings suckah!"
  },
  "Options": {
    "Days of the week when Protector is enabled": "Monday,Tuesday,Wednesday,Thursday,Friday,Saturday,Sunday",
    "Inform Interval": 10.0,
    "Inform Player": true
  },
  "Start of raids": {
    "Hours": 0,
    "Minutes": 0,
    "Seconds": 0
  }
}

 

This plugin may be more what you are looking for http://oxidemod.org/plugins/indestructable-buildings.966/ , but you can still use my plugin as Rokaroo said just setting start to 00h00m01s and end to 00h00m00s or something like that.

 

The reason why I use yours, is because I then have the opportunity to turn raiding on, in different time intervals or days.

My friend and I are still struggling with the PvE or PvP thing, so we could do something where it's PvP in the weekends or something. Like people have some time to find weapons and build a base, and then you fight others in the weekend

 

Hi.

I have a semi PVE-PVP server. I am really interested by this plugin.

We, as admins, allo PVP and raid to take place each day of the week from 7pm until midnight. 19h00 - 00h00

Can you tell me if this setup is correct then :

Code:

{
  "End of raids": {
    "Hours": 19,
    "Minutes": 0,
    "Seconds": 0
  },
  "Messages": {
    "InformMessage": "Vous ne pouvez effectuer de raids (heure réelle) entre {0} et {1} !"
  },
  "Options": {
    "Days of the week when Protector is enabled": "Monday,Tuesday,Wednesday,Thursday,Friday,Saturday,Sunday",
    "Inform Interval": 10.0,
    "Inform Player": true
  },
  "Start of raids": {
    "Hours": 00,
    "Minutes": 0,
    "Seconds": 0
  }
}

It is strange to me to see a message on the server : raids are activated between 0h 0m 0s and 19h 0m

Wouldn't be the other way round ? to see raid are activated between 19h00 and 00h00 ?

Code:

{
  "End of raids": {
    "Hours": 00,
    "Minutes": 00,
    "Seconds": 0
  },
  "Messages": {
    "InformMessage": "Vous ne pouvez faire de RAIDS (heures réelles) entre {0} and {1} !"
  },
  "Options": {
    "Days of the week when Protector is enabled": "Monday,Tuesday,Wednesday,Thursday,Friday,Saturday,Sunday",
    "Inform Interval": 10.0,
    "Inform Player": true
  },
  "Start of raids": {
    "Hours": 19,
    "Minutes": 00,
    "Seconds": 0
  }
}

Thanks.

 

Your second set of code is correct, the first set of code would be a 19 hour window (from midnight to 7pm)

 

I did a modification for the hour of raids : I would like to authorize raid betweent 7pm until 1am each day of the week ( instead of 7pm and midnight )

When I let 18 and 00 is it ok ( I see now it is enabled and will be finished in 5 hours ( 1 o'clock here ).

small question : "Inform Interval": 10.0,

Normally, can you confirm that an automatic message should pop on screen in game every 10 minutes ?

Because for the moment on the server we are RAID ENABLE ( from 7pm ( real time ) 18h00 until 1am real time 00h00 for the plugin. And I don't see any messages '( 10 min interval )

 

No it's the interval of the warning "you can't raid now" for when a player tries to hit something while it's protected so it doesnt wpam the player everytime he hits. And it's 10sec not min.
The plugin will be updated soon so it's more easy to use and more complete.

 

thanks for the answer ! I really like it ! It make perfect control with the rules I made for the server I use ! I will continue to follow you and help if needed.

 

Is it possible to activate several intervals? For example, from 10:00 to 11:00 and from 18:00 to 19:00?

Возможно ли активировать несколько интервалов? Например, с 10:00 до 11:00 и с 18:00 до 19:00?

 

Not at the moment sorry.

 

I have a problem...


Here is my code :

Code:

"End of raids": {
  "Hours": 00,
  "Minutes": 00,
  "Seconds": 0
  },
  "Messages": {
  "InformMessage": "You can't raid between {0} and {1} !"
  },
  "Options": {
  "Days of the week when Protector is enabled": "Monday,Tuesday,Wednesday,Thursday,Friday,Saturday,Sunday",
  "Inform Interval": 10.0,
  "Inform Player": true
  },
  "Start of raids": {
  "Hours": 18,
  "Minutes": 0,
  "Seconds": 0
  }
}

18/08/2015 : BuildingProtector activated correctly at 18h00 (7pm) to enable raids. At 00h00 ( 1am) Raids were disabled by guardian and directly after that message raids were enabled again for 6 hours. ( I don't know why )

19/08/2015 : same again this night with the config : at 1am we received the message from guardian saying raids were finished and directly a message allowing raid for 6 hours... please help ^^ ? ^^

20/08/2015 : same today ( to give several exemples ). Plluging was working perfectly until 1am ( the end of raid ). we received the message from guardian ending the raid period and directly after started again. I had to make an oxide.reload of the plugin to make it work correctly again.

21/08/2015 : I deleted the plugin and put it again on the FTP ( letting 18h00 00h00 for 7pm till 1am ). At 1am here is the message from guardian :

So it is closing the raid correctly but directly after, again, it starts for a 6jours period... I have to make an oxide.reload BuildinProtector to stop it and be oki ( to wait 17h for next raid period )

1)

2)

Please do something ;-) I would like to sleep at that time ;-)

22/08/2015 : same again. Stopping correctly at 1am, but enabling raid directly after for 6 hours. I have to make an oxide.reload of the plugin to make it work correctly ( start again in 17hours)

10/09/2015 I come with some news.

I can make this plugin work correctly but I have to manually launch a reload after the raid period... otherwise it is fucked up !

Moreover now I creates an error message in the console and I am pretty sure it is coming from this plugin :

Code:

(14:25:56) | The referenced script on this Behaviour is missing!
(14:25:56) | The referenced script on this Behaviour is missing!
(14:25:56) | The referenced script on this Behaviour is missing!
(14:25:56) | The referenced script on this Behaviour is missing!
(14:25:56) | The referenced script on this Behaviour is missing!
(14:25:56) | The referenced script on this Behaviour is missing!
(14:25:56) | The referenced script on this Behaviour is missing!
(14:25:56) | The referenced script on this Behaviour is missing!
(14:25:56) | The referenced script on this Behaviour is missing!
(14:25:56) | The referenced script on this Behaviour is missing!
(14:25:56) | The referenced script on this Behaviour is missing!
(14:25:56) | The referenced script on this Behaviour is missing!

 

Hi.

The guy who is in charge of this plugin seems not to be present anymore.
BuildingProtector for Rust Experimental | Oxide
I tried to send him e-mail in order to give feedbacks to him about his plugin but never answers.

First of all I created this topic in order to let people using this plugin know that if you let it on your FTP server, it will prevent it from starting or restarting. You have to remove it, and upload it again after server is running properly.

Secondly and more important I would like to ask the community of plugin developpers if someone could take and continue this wonderful plugin we are using for our server. It would really be appreciated as it is not perfect and needs manual interventions to make it work properly.

Thanks in advance !

 

Hi you can use now Timed Events for Rust Experimental | Oxide and execute server.pvp true/false in specified time it only disable explosives on server nothing else.

 

From what i've read, your working on it, but I was wondering when the certain days being set on the pluggin would be added? Im currently using this pluggin inplace of zones because its easier to not have an admin on to turn raid on/off, but these are my supported raiding times and im hoping to use this pluggin to actually make this possible:
Raiding will be Tuesday-Thursday from 5pm-10pm EST and Saturday-Sunday 12pm-10pm EST, no Raiding will be allowed on Mondays and Fridays to allow for a chance to rebuild/prepare for raid. (Raiding is any unauthorized access to a players base).

 

No longer works on my server.
What thank you