Hi will i be able to run a 100 slot server with these specs
32gb of drr3 ram
Intel Xeon CPU E5-2660 v4 @ 2.00 GHz
thank![]()
Server with these specs?
Discussion in 'Rust Discussion' started by RedZephyr, Nov 10, 2016.
-
I would go to 3.2 GHz the rest is ok but you can half the ram
-
Will you have 100 people on, or 100 slots?
-
Well this is a new server , so it wont reach 100 people immediately , but id like it to be able to hold a maximum of 100.
[DOUBLEPOST=1478806454][/DOUBLEPOST]Server hardware discussion. Any server Owner Must Read !
i read this thread here , and it says that cpu performance cannot be directly measured by how many GHz a cpu has. Is this correct do you think?
thanks. -
Is it a dedicated server?
-
yes it is
-
Can you post a link to it
Atleast 8GB, Maybe 16GB if you're looking at possibly upping the max slots later on or change the map to a bigger size.
An I7 CPU (Over 3.4GHz) would be better than a server grade CPU as Rust would not use all the cores, Also its cheaper!
if you go for a Server Grade CPU, Go for less cores (Min 2 Cores) but more GHz
I would go with someone like NFO servers for hosting -
Dedicated server Dedibox® - Online.net
im using the
Dedibox®
WOPR 2016
but have assigned only 32gb of ram to the virtual machine that the rust server runs on.
[DOUBLEPOST=1478813030][/DOUBLEPOST] -
[DOUBLEPOST=1479405741][/DOUBLEPOST]also changed to server 2008 r2 from 2012 r2 -
-
-
-
-
thanks man